Description

---

Being on oxygen therapy should never keep you from enjoying life. Simply go is the first oxygen concentrator by Philips that combines the benefits of continuous flow and a light design. So don’t think and just go with Simplygo!

---

Features:

---

Who is Simplygo for?

If you’re on oxygen therapy and looking for a device that combines continuous flow and pulsatile flow modes, Simplygo is a perfect choice for you. Thanks to its lightweight of 5kg you can take it anywhere you want.

What is the SimplyGo used for?

The SimplyGo is the only portable oxygen concentrator that combines continuous flow and pulsatile flow modes. Allowing it to function as a stationary oxygen concentrator with a programmed continuous flow of oxygen.

Just like other oxygen concentrators, the Simplygo synchronizes the oxygen pulse to your breathing which makes it perfect for walks.

Tip: Are you going to travel by plane? In this case, we recommend you take one or more additional batteries with you on board.

Pulse Flow Mode

When SimplyGo is set to pulse flow mode, oxygen is released with each breath, depending on the setting chosen. When no inspiration is detected by the device it will automatically release a given amount of oxygen. If no inspiration is observed after 2 minutes, Simplygo will sound the alarm before automatically shutting off 30 seconds later.

Continuous flow

The SimplyGo can also deliver oxygen continuously. The amount of oxygen SimplyGo delivers in this mode is adjustable. The setting is 0.5 – 1 – 1.5 or 2 liters of oxygen per minute.

sleep mode

The Sleep mode is comparable to the Pulse Flow mode. The difference is that Simplygo’s sleep mode detects better the start of your inspiration. The SimplyGo then releases the amount of oxygen corresponding to the settings. During inspiration, the pulse takes longer so it’s more comfortable for you to sleep with the oxygen supply.

Components

•         Philips SimplyGo
•         Full battery (rechargeable)
•         Bag
•         Cart
•         AC power supply and cable
•         DC power supply
•         Accessory bag

---

How to use the Simply Go:

---

• Plug the device in to get it charged. The battery may come partially charged but it can take up to 4 hours for a complete charge.
• Connect the nasal cannula to your cannula connector on top of the device
• Now, press the control button on the control panel. After the first press, the display screen and the five backlights turn on.
• Press the power button a second time to place the device in operating mode. When you turn on the SimplyGo device, it will sense when you’re breathing from it.
• You can start breathing from the device. Although it can take up to 20 min to stabilize within its oxygen purity specifications.
• To adjust the device flow setting press either the + or – button.

---

Specifications:

Oxygen Concentrations	86 to 97% at all settings %
Continuous flow settings	0.5/1/1.5/2 l/min
Pulse mode bolus size	1=12 ml/1.5=18 ml/2=24 ml/2.5=30 ml/3=36 ml/3.5=42 ml/4=48 ml/4.5=54 ml/5=60 ml/5.5=66 ml/6=72 ml
Sound level	≤ 43 dB at pulse setting 2 dB
Size	29.2 cm x 25.4 cm x 15.2 cm (11.5″ x 10″ x 6″)
Weight with battery	4.5 (10) kb (lbs)
SimplyGo’s battery duration	3.0 (pulse dose setting of 2*) and 0.9 (continuous flow 2 LPM) hour(s)
Operating temperature	5° to 40°C (41° to 104°F)
Filtration	Internal bacteria filter
Storage temperature (unit only)	-20° to 60°C (-4° to 140°F)
Altitude	Up to 3.048 m/10,000 ft
DC power – input	11.5 to 16 VDC and 18 A max
DC power – output	19 VDC and 7.9 A max
AC power – input	100 to 240 VAC/ 50 to 60 Hz/1.7 A max
AC power – output	19 VDC and 7.9 A max
Power consumption	150 while charging/120 while not charging W
Alarm types	Low oxygen purity/No breath/High breath rate/No flow/Low battery/Depleted battery/Wrong battery/System technical fault
Lithium Ion battery	14.4 VDC 6600 mAh (LiIon), 0.7 kg (1.5 lbs), charge time is approximately 2 to 3 hours per battery from fully discharged