Bipap A30 Ventilator International

SAR 17,000.0


10 in stock


The Philips BiPAP A30 was created to bring personalized professional respiratory assistance to the comfort of your home, by combining a user-friendly interface with the performance of the latest technological advancements.


As an NIV system, the BiPAP A30 ventilator is intended for patients with Obstructive Sleep Apnea (OSA) or other chronic insufficiency respiratory conditions Like COPD that require non-invasive ventilation assistance.


Prioritizing your comfort

Thanks to its user-friendly and intuitive interface, the A30 ventilator guarantees a smooth and simple transition from hospital to home.

The BiPAP A30 also includes the auto-TRAK algorithm along with an improved leak compensation technology for an optimal adaptation to your respiratory changes, resulting in a comfortable and effortless experience.

AVAPS enhanced therapy

The A30 bi-level ventilator comes with the enhanced AVAPS hybrid ventilation control to provide and maintain the right pressure at the right time, adapting to your specific needs. Your AVAPS rate can also be adjusted by a physician so it meets your condition best.

Humidity control

The One Humidity Control system and the unique ‘Dry Box’ design help reduce rainout and water ingress for an optimum experience.

View oximetry & ventilation data on one screen

The BiPAP A30 is compatible with the Philips oximetry module, allowing a display of the SpO2 level and heart rate simultaneously with the ventilation data on the screen.

Better data management

This device comes with internal memory and an SD card that can save up to 1-year ventilation information for the best therapy data management.

How to use:

How to start therapy

  1.   Connect the device to a power source (AC or DC)
  2.   Turn on the device by pressing the power button
  3.   On the display screen, select “Therapy” to start the treatment

How to stop

  1.   Press the power button
  2.   The screen will then display a 2 options menu: “Standby” and “Power Off”
  3.   Select “Standby” to keep the power and top the blower
  4.   Select “Power Off” to turn the power off
  5.   Once you have selected an option, press “OK”


The A30 can also be used with a humidifier. To fill the humidifier:

  1.   Turn the device off
  2.   Lift the humidifier door until it locks in place
  3.   Grasp the front of the chamber and slide it toward you
  4.   Separate the top and bottom of the chamber by pushing the tab on the top
  5.   Fill the chamber with distilled water to the maximum line indicated on the sides.
  6.   Reassemble the chamber
  7.   Clean the chamber every week or two by immersing it in vinegar
  8.   Note: Select “Preheat” on the standby screen so that the humidifier preheats before therapy is delivered.


Ventilation modes CPAP, S, S/T, PC, T
Hybrid ventilation AVAPS (Average Volume Assured Pressure Support)
AVAPS rate 0.5 to 5 cm H2O/min
IPAP 4 – 30 cm H2O
EPAP 4 – 25 cm H2O
Target tidal volume (when AVAPS enabled) 200 – 1500 ml
Breath rate 0 – 40 BPM (4 – 40 BPM in T mode)  
Inspiratory time 0.5 – 3 sec.
Triggering and cycling Digital Auto-TRAK algorithm
Rise time 1 (100 ms) – 6 (600 ms)  
Size 21.6 cm W x 19 cm L x 11.5 cm H
Weight 2.1 Kgs (with power supply)
Noise level < 30 dBA at 10 cm H2O
Humidification System One humidity control and ‘Dry Box’ technology
Alarms Patient disconnection, Apnea, Low minute ventilation, Low tidal volume (with AVAPS only), High respiratory rate
Monitoring Pressure, tidal volume, minute ventilation, respiratory rate, Leak, I/E ratio
Battery backup 11 hours at IPAP 15 / EPAP 4 cm H2O and 12 BPM
DC power source 12 VDC, 5.0 A (external battery), 24 VDC, 4.2 A (power supply)
Data management EncorePro 2 and DirectView software Compatible with oximetry module Advanced detection of residual respiratory events (Apnea/Hypopnea Index, Obstructed Airway Apnea, Clear Airway Apnea, Hypopnea, Periodic Breathing, RERA, Large Leak and Snore)
Remote control Compatible with PC Direct
Polygraph and polysomnography connections Direct connection to Alice PDx and Alice6 PSGs AOM to connect to most PSG systems