Resmed Airfit F10 Full Face Mask

SAR 900.0 SAR 950.0



10 in stock


More than a traditional full-face mask, the ResMed Airfit F10 is a lightweight, comfortable and convenient mask that offers you just as much reliability in the most compact and quiet design.


AirFit F10 mask, a lightweight mask

Designed with the SpringAir cushion, this mask is the lightest full-face model in the CPAP full-face mask category.

With no central bar, the Airfit F10 frees up your field of vision so you can conveniently wear your mask to bed and carry on to read or watch TV.

AirFit F10, very good sealing

Thanks to its dual wall system, the SpringAir cushion is designed to inflate during inspiration, just enough to seal your mask in perfect contact with your face. The streamlined SoftEdge (seamless, to avoid contact irritation) give the mask extra stability and performance, even when you move.

A practical mask:

The elbow and the cushion are easily detached, for easier cleaning.

The diffusion of the air leak is circular around the elbow, to reduce its flow and the sound level. Making the Airfit F10 a very quiet mask.


Included in your AirFit F10 set:

  • A rigid frame
  • An AirFit F10 cushion Available sizes: XS, S, M, L
  • A streamlined SoftEdge headgear
  • An elbow
  • A user manual

Fitting tips

Your Airfit F10 mask comes in 3 sizes: Small, Medium, and Large.

For a perfect fit, make sure that the headgear straps are adjusted to your face by pulling the straps. This allows a thin layer of air to build up which helps your face mask perfectly seal into place avoiding leakage and cushion slipping incidents.

Maintenance tips

CPAP masks are permanently exposed to warmth and humidity, this causes bacteria, perspiration, and facial oils to build up. This is why we recommend you clean your Airfit F10 mask daily.

Daily maintenance

  • Disassemble your mask, separate:
  1. The cushion
  2. The body
  3. The CPAP hose interface
  4. The headgear
  • In a large container, pour warm soapy water
  • Soak your cushion and your CPAP hose interface in water for 10 minutes.
  • Scrub the cushion and the inlet of the pipe interface with a soft brush (a used toothbrush can do the trick!)
  • Rinse with clean water
  • Allow to sit and dry. If you want to speed up drying, use a soft cloth.

Quick daily maintenance

For faster cleaning, you can use Mask CPAP wipes for your cushion and the outer part of your CPAP hose interface. Please note that this does not fall within the manufacturer’s recommendations.

Weekly maintenance

  • Disassemble your mask, separate:
  1. The cushion
  2. The body
  3. The CPAP hose interface
  4. The headgear
  • In a large container, pour warm soapy water.
  • Soak the body of your mask and your harness for 10 minutes.
  • Rub by hand
  • Rinse with clean water
  • On a cloth, let it dry. If you want to speed up drying, you can use a hair dryer (low heat, at least 10 cm from the equipment to be dried)


  • Ease of use: With only four parts, the AirFit F10 mask is quick and easy to reassemble and clean.
  • Ultra-quiet: Circular vents gently diffuse exhaled air away from you and your partner to create a peaceful, restful environment.
  • Practical: The quick-release elbow is equipped with side buttons that help you quickly detach the mask from the breathing circuit, allowing you to get up at night without having to remove the mask.
  • A freeing experience: The Airfit F10 doesn’t include any forehead contact so you still can enjoy your hobbies and even wear your glasses while the mask is on.


Size Small/Medium/Large
Free of Latex/PVC/DEHP/Phthalate Yes
Pressure 3-40cm H2O
Warranty 90 days
Weight 85-94g
Material Silicone, plastic, nylon/lycra
AirMini compatible No
Contains magnets No